大型民用客机液压系统的对比与分析

通过对波音787和A380液压系统的分析和研究,探讨了5000psi液压系统关键技术。     

先进复合材料在未来飞行器中的应用

复合材料在飞行器结构中的用量已经成为航空航天结构的先进性标志之一,其优越的综合性能非常适应未来飞行器的发展趋势.文章概述了先进复合材料在航空航天结构应用中的主要发展历程,结合未来飞行器的发展趋势,预测了先进复合材料在未来飞行器运用中可能带来的新挑战新机遇.     

编织玻璃纤维与碳纤维铺层功能梯度板吸能特性研究

为探讨由SW100/5228A玻璃纤维编织（GFRP）层板与CCF-1/5228A碳纤维复合材料（CFRP）层板以不同比例组成的功能梯度板的吸能性能,用重量80g直径23mm的弹丸对六种比例组成的功能梯度板进行了速度约70m/s的弹道试验。对弹击后的试样进行了损伤分析和剩余强度试验,通过C扫描发现,大面积损伤往往发生在...     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

Inversion of satellite gradiometry data using statistically modified integral formulas for local gravity field recovery

The satellite gravity gradiometric data can be used directly to recover the gravity anomaly at sea level using inversion of integral formulas. This approach suffers by the spatial truncation errors of the integrals, but these errors can be reduced by modifying the formulas. It allows us to consider smaller coverage of the satellite data over the region of recovery. In this study, we consider the second-order radial derivative (SORD) of disturbing potential (T_rr) and determine the gravity anomaly with a resolution of 1° × 1° at sea level by inverting the statistically modified version of SORD of extended Stokes’ formula. Also we investigate the effect of the spatial truncation error on the quality of inversion considering noise of T_rr. The numerical investigations show satisfactory results when the area of T_rr coverage is the same with that of the gravity anomaly and the integral formula is modified by the biased least-squares modification. The error of recovery will be about 6 mGal after removing the regularization bias in the presence of 1 mE noise in T_rr measured on the orbit.     

相对差分单向测距（△DOR）技术在探月工程中的应用研究

相对差分单向测距（△DOR）是一种高精度测角技术,在深空探测任务的高精度测定轨方案中得到广泛应用．介绍了△DOR测量的基本原理及CCSDS（国际空间数据系统委员会）关于△测量的相关标准．针对中国探月工程月面软着陆任务提出的高精度测定轨要求,分析了△DOR测量的信号形式、工作模式以及测量精度,推导了解模糊过程．研究表明,△DOR测角精度达到25nrad,对应到月球上的距离约为10m．     

钛合金的研究进展与应用

简述了国内外钛合金的研究状况与动向。具体介绍了高温钛合金、钛基复合材料、高强高韧钛合金、阻燃钛合金以及钛合金防氢脆、氧脆和磨损研究的发展。对钛合金在军事工业、生物医学及体育和汽车等民用领域上的发展和应用做了简介,最后指出我国钛合金发展中存在的问题和优势以及应用前景。     

和差通道相位差对差模跟踪接收机的影响分析

在数据中继卫星系统中,中低轨航天器常采用差模跟踪技术,完成对数据中继卫星的捕获跟踪,建立高速数据中继传输链路。文章根据某任务跟踪接收机实际设计参数,用Matlab／Simulink软件对和差通道相位差对跟踪性能的影响进行了仿真分析。     

基于ANSYS的同面多电极电容传感器仿真研究

同面多电极电容传感器是一种新的飞机复合材料构件损伤检测技术,该检测技术的正问题中敏感场分布函数的计算要涉及到静电场中电容计算问题。在仿真研究中,电容要通过场的数值计算方法来求得。本文介绍了如何使用ANSYS有限元分析计算同面多电极电容传感器中的各电极对之间的电容,对检测材料发生异常及传感器参数改变时电容的变化进行了分析,为损伤检测的特征提取和逆问题图像重构提供了仿真数据。     

基于产学研模式的飞机机务维修实训平台建设

目的探索构建校内生产性实训基地;方法以飞机结构腐蚀与控制实训平台的建设为例;结果阐述校内实现以产学研相结合模式来进行实训平台建设;结论对其它机务维修专业课程的实训平台建设起到引导的作用。